replace all text with this: dwc_otg.lpm_enable=0 console=serial0,115200 console=tty1 root=/dev/mmcblk0p2 rootfstype=ext4 elevator=deadline fsck.repair=yes rootwait modules-load=dwc2,g_ether quiet init=/usr/lib/raspi-config/init_resize.shīe careful with this step as the formatting is very picky in this fileĤ: Eject your MicroSD card and boot it up in your pi! make sure you plug the usb cable from your mac into the USB input of your pi - this can also power it.ĥ: Once its booted you should now be able to open up terminal, and using ping raspberrypi.local you can see the RPi's IP address.Ħ: Using this address in terminal tpye ssh It should ask you for a password, this will default be

You can now eject the card and boot it on your RPiģ: Finally, open up the cmdline.txt.

Use 'get info' to remove the extension on the file, and it should appear as an EXEC file. I found this very helpful for setting up mine: ġ: open up the boot partition on the micro sd with finder and in the file config.txt add dtoverlay=dwc2 to a line on the bottom and save it.Ģ: Create a new file called ssh using textedit and save it onto the boot partition.

Pi zero w headless setup